100% Butyl Cellosolve- Boosts Wood Strippers to remove water based stains and paints. Our go to Booster for those tough jobs with water based coatings that a regular stripper won't remove. 

A PERFECT BOOSTER FOR: 

Wood Strippers when removing water based stains like Behr, Olympic or Superdeck

MIXING INSTRUCTIONS:

• Add Butyl Boost to your already made wood stripper.  Use up to 10% Butyl Boost in your stripper or 1/2 gallon Butyl Booster per five gallon stripper mix.

ADDITIONAL INSTRUCTIONS:

• Strippers must be kept wet or they will not work, a light mist every few minutes will do.
• Test on a small, inconspicuous area of the wood to ensure proper wood care.
• Always wet plants, shrubs, and other surrounding vegetation before and after use.
• Always brighten the wood after using a wood stripper using Stain & Seal Wood Brightener

WARNING:

Extreme caution should be taken when using strippers. They will burn skin, remove paint from houses, and kill plants, grass and pets.  

• Keep out of reach of children.
• Exposure to Butyl Cellosolve could cause irritation to the eyes, skin, or lungs. If contact occurs, rinse immediately with water for 15 minutes. If irritation continues, seek immediate medical attention.
• Do not ingest.
• Always wear personal protective equipment when using this product.
• DO NOT MIX WITH OTHER CHEMICALS.